Two Different Program Configurations for Tatical Lights
发布于：2024-08-27
If the light is only in strobe when you click the tail switch, that means the light is currently in tactical mode. Please try the below method to switch the program configuration.
Configuration 1(Factory Default Setting): Click the tail switch lightly to produce a low light output or press the tail switch hard to produce a high light output. Single click (click and release quickly) the tail switch to turn the flashlight on or off. When you press and hold the switch, the flashlight will be in momentary mode; when you release the tail switch, it will turn off.
Configuration 2: Press the tail switch lightly to produce a high light output or press the tail switch hard to enter a momentary strobe mode. When you release the tail switch from strobe mode, it will turn off.
SWITCH BETWEEN DIFFERENT PROGRAM CONFIGURATIONS Switch between configuration 1 and configuration 2 by loosening and tightening the tailcap while holding the tail switch button at the same time.